Pressure Resistance: Less than 1.6 cm H2O / 30l pm
Moisture Output: 30 mg @ 500 ml
Packaging Type: Boxes, Packets
We are an eminent manufacturer and supplier of excellent quality HME & BVL Filter.This product effectively filter and stop the bacteria and virus between breathing system and breathing circuits. It is manufactured with the aid of advanced technology using quality-approved raw material under the observation of our experienced professionals. The offered product is available in different specifications to meet the needs of the clients. Our reputed clients can avail this HMEF BVL form us at rock-bottom prices.
Sizes Adult & Pediatric.
Also available in PE pack.
Equipped with 0.3 micron bacterial filter membrane for up to 99.99% of efficiency.
Pressure resistance less than 1.6cmH2O/30lpm.
Moisture output 30mg @ 500ml.
Standard coaxial 22F/15M for inlet port and 22M/15F for patient port meet ISO 5356-1 standard, 4.3 luer connector with strap for pressure sensing or CO2 detection.
Material Polypropylene and PU foam meet ISO-10993 for bio-compatibility requirement.
Unit Specification: G.W.: 0.1Kgs N.W.: 0.07Kgs, size: 83.0 x 77.0 x 50.0mm
Carton specification: G.W.: 11.0Kgs N.W.: 9.0Kgs, size: 420.0 x 390.0.0 x 280.0mm (100 pcs/CTN)
Measurement range: 70%-99%
Accuracy: +-2% on the stage of 70%-99%, unspecified(<70%) for SPO2
Basic Functions and features Parameters:
Two parameters:SPO2, Pulse Rate
COLOR OLED display, manual four direction adjustable
SpO2 and pulse monitoring, and Waveform display
Low-power consumption, continuously work for 20 hours
Small in size, light in weight, and convenient to carry
Low voltage alarm display, Auto power-off
Adjust the display interface direction automatically , according to the patient observation data needs
Runs on standard AAA batteries
Automatic power off when no signal in 8 s
A menu function can set up oxygen alarm limit, the upper and lower limits of PR, alarm switch, ·sound switch
Detailed descriptions of product functions:
Measurement range: 70%-99%
Accuracy: ±2% on the stage of 70%-99%, unspecified(<70%) for SPO2
Low perfusion: <0.4%
Accuracy: ±1BPM or ±1%(the larger one)
Power: two AAA 1.5V alkaline batteries
Power consumption: below 30mA
Automatic power-off: the product shuts down automatically after no signal for 8 seconds
Operation temperature: 5ºC-40ºC
storage temperature: -10ºC-40ºC
Ambient humidity: 15%-80% on operation
10%-80% in storage
Air pressure: 70kPa-106kPa
Declaration: EMC of this product comply with IEC60601-1-2standard
Accessory: Lanyard, user manual and battery. Package Info: Unit Specification: G.W.: 0.1Kgs N.W.: 0.07Kgs, size: 83.0 x 77.0 x 50.0mm Carton specification: G.W.: 11.0Kgs N.W.: 9.0Kgs, size: 420.0 x 390.0.0 x 280.0mm (100 pcs/CTN)
Smoothly finished tube tip and cuff welds intended for ease of intubation and extubation. Flexible to conform to patient position. Spiral reinforcement intended to resist crushing or kinking.Product Features
Smoothly finished tube tip.
Flexible to conform to patient position.
Spiral reinforcement minimises crushing or kinking.
Cuff tubes with Soft Seal cuff.
High volume, low pressure cuff.
Provides effective seal reducing the risk of creases or folds.
Syringe Needle Destroyer Plastic / Stainless Steel is designed to destroy the used disposable needles and syringe nozzle easily. It ensures that the health care workers are not required to touch the needle while disposing off the same at the point of use, thus providing an adequate safeguard against accidental pricks which may even result in loss of life.
Owing to our expertise in this domain, we are engaged in manufacturing and supplying DUO LIMBO Circuit. It is mainly used with anesthetic apparatus and ventilators as an air link for sending anesthetic gases, oxygen and other medical gases into the body of a patient. Our diligent professionals manufacture this product as per international quality standards with the help of pioneering technology using the finest quality raw materials procured from reliable vendors of the market. Our valuable clients can avail this DUO LIMBO Circuit from us at competitive prices.
We are offering Tri-Ball Incentive Spirometer to our clients. An Incentive Spirometer or Respiratory Exerciser or Breathing Exerciser is a good option to make your lungs stronger. Designed with 3 chambers, this device will help you to proceed step by step in testing your breathing. Get best price of Tri-Ball Incentive Spirometer.
Tri-balls incentive spirometer is a breathing / lung exerciser which is a flow-oriented device, provides an indirect indicator "ball" of the patient's inspired volume. It be used to help strengthen respiratory musculature and to help restore and maintain lung capacity by encouraging a slow, deep breathing.
Three color-coded balls in each chamber provide a visual incentive for the patient. Air flows into single channel, when it passes through the chamber, it raises each of the three balls depending on the flow inhaled per second.
Specification: 12mmOD connector. Flow rates 600mL/sec, 900mL/sec, 1200mL/sec. by using different colors of ball for easy to identify the flow rate.
Material: AS for chamber, PE for ball and mouthpiece, and EVA for tubing.
Humidifier Bottles features a dome lid design that incorporates refinements, resulting in high performance. It provides quiet operation with low system back pressure and a 3 PSI pressure pop-off, alarm. This bottle easily attaches to your oxygen unit. Turn your existing oxygen concentrator into an oxygen concentrator humidifier!
Our disposable Prep Razor design creates the perfect angle for shaving hair. The contoured handle with sure grip ridges provides precise fingertip control A built-in comb lifts and separates hair, which helps to provide superior prep.
SHAVE THE HAIR, NOT THE SKIN Our design creates the perfect angle for shaving hair.
Handle is in front of the blade. NO pressure is required for prepping.
Contoured handle with perfect grip provide precise optimal finger control.
Built-in comb lifts and separates hair, providing superior prep.
Easy to use handle lies in front of blade thus requiring only light gentle pull instead of pressure
Platinum coated stainless steel blade shaves close without nicks or irritation
The open design provides optimal view of shaving area
Our razor is very cost effective - no need for more than one razor per procedure
Our product is Sterile , Individually packed for use in hospitals / clinics / ICU.
No pressure required for prepping Built-in comb lifts and separates hair Proven to reduce risk of infections and pressure of prepping. These prep razors are Individually packaged - Non sterile Contoured handle with sure grip ridges provides precise fingertip control The handle lies in front of blade thus requiring only light gentle pull instead of pressure. Single platinum coated stainless steel blade shave close. Open design provides optimal view of shaving area.